Magnet attraction is an observation, not a complete identification of a knife material or steel grade.
What the observation can tell you
A magnet can show whether a tested area produces a detectable attraction under the conditions of that informal check. That observation is limited to the particular location and circumstances. It does not, by itself, name the alloy, confirm a steel grade, establish the material of every component, or prove that two similarly reacting products use the same material.
Why attraction is not a material identity
Knife steels are defined by more than a single visible or tactile behavior. Spyderco’s Steel Elements page explains generally that modern steels use carefully balanced alloying elements that influence properties such as toughness, corrosion resistance, strength, wear resistance, and ease of sharpening. A simple attraction result does not reveal that complete composition and should not be converted into claims about those properties.
A knife may also contain several components. Testing one location cannot establish the identity of the blade, liner, fastener, or handle structure as a group. Coatings, the exact test position, component thickness, and nearby parts can further make an informal observation unsuitable as a product specification.
What should establish the material
Use a traceable statement for the exact model and component as the primary basis: for example, the matching product specification, instructions, component documentation, or another formal record. Confirm that the model and version match the item under review. General selection guidance can help identify which materials matter for an intended use, but it cannot identify a particular SEWARD product.
If the formal material identity is unavailable, report it as unspecified. Do not recommend magnet attraction as a substitute for grade identification, and do not infer hardness, corrosion behavior, toughness, origin, or suitability from the result.
Can a magnet distinguish two specific steel grades?
Not reliably by attraction alone. Grade identification requires appropriately matched documentation or a suitable material-analysis method.




