A comparison of the stated 440C and AUS-8 fixed-blade listings for wet outdoor use, separating documented facts from what neither listing settles about moisture.
The two listings do not document the same facts
The (B26) 's Tactical Straight Fixed Blade Knife states a total length of 29.7 cm, a blade length of 15.5 cm, a blade width of 3.6 cm, a blade thickness of 3.9 mm, a 440C blade material, a colored wood handle with a handle length of 12.5 cm, handle width of 3.0 cm and handle thickness of 20.0 mm, and a net weight of 316 g. It gives no sheath line and no hardness figure.
The Fixed Blade Knife states a total length of 30.5 cm, a blade length of 17.9 cm, a blade thickness of 5 mm, a blade width of 3 cm, an AUS-8 titanium-plated stone-washed blade, a stated hardness of 60 HRC, and a cowhide sheath with a built-in ABS protective shell.
The arithmetic is simple. The AUS-8 listing's stated blade is 2.4 cm longer and its stated total length is 0.8 cm longer. Its stated blade thickness is 1.1 mm greater. The 440C listing is the only one of the two that states a net weight, at 316 g, so the two cannot be compared on mass. Those are comparisons of stated figures, not statements about how either knife cuts, balances or feels in hand.
What a steel name does and does not settle for wet use
440C and AUS-8 are steel designations, and the listings use them as material labels. Neither listing states a corrosion-resistance rating, a sharpening angle or a care routine, so neither label tells you how long either blade resists moisture on a wet trip.
General steel education from established makers treats stainless grades as a broad family with differing balances of corrosion resistance, toughness and edge performance, and it stresses that heat treatment and geometry affect the finished blade. That is background about steel families, not a measured result for either supplied knife, and it does not establish that one of these two blades will outperform the other in wet conditions.
One documented difference sits on the AUS-8 listing: it names a titanium plating and a stone-washed finish. The listing does not describe how that plating should be treated, how thick it is, or which parts of the blade it covers, so it cannot be read as a corrosion guarantee. The 440C listing names no coating or finish at all.
How to use these facts in a wet-trip decision
If a stated longer blade and a stated thicker blade are what you want documented, the AUS-8 listing gives 17.9 cm and 5 mm. If a stated net weight and a stated handle length are what you want documented, the 440C listing gives 316 g and 12.5 cm.
The sheath question is the clearest practical split. Only the AUS-8 listing names a sheath, a cowhide one with a built-in ABS protective shell, and it gives no sheath dimensions or care method. The 440C listing gives no sheath line, so sheath inclusion and material are undocumented and belong in a question to the seller.
Neither listing states whether the blade or any other part is user-replaceable or serviceable, and neither describes how the handle is fixed to the blade or whether that junction is watertight. Where those details are missing, they are missing; do not assume either a permanent or a replaceable arrangement.
For a wet trip, the honest position is that neither listing settles which blade handles moisture better. Compare the stated figures against your own needs, plan to dry whichever knife you carry before storage, and ask the seller about the missing points that matter to you: the care the named blade material needs, whether a sheath is supplied with the 440C version, and how each stated length was measured.
Does either listing state a corrosion-resistance rating?
No. Neither the 440C listing nor the AUS-8 listing gives a corrosion-resistance rating, a care routine or a sharpening angle. The AUS-8 listing names a titanium plating, but it does not describe how that plating should be treated.
Which listing names a sheath?
Only the Fixed Blade Knife with the AUS-8 blade, which names a cowhide sheath with a built-in ABS protective shell. It gives no sheath dimensions or care method. The 440C listing gives no sheath line, so sheath inclusion is undocumented for that version.
Can I compare the two knives by weight?
No. Only the 440C listing states a net weight, at 316 g. The AUS-8 listing gives no weight figure, so there is no second number to compare it with.
